What Is The Difference Between An A & B V Belt? - Belthubs (2024)

Explore the difference between A and B V-Belts, two common profiles of V-Belts used in various machines and engines for power transmission. Delve into the question of their cross-sectional shape, dimensions, and applications, and learn how these belts differ in terms of power transmission capacity, speed capability, and resistance to wear and fatigue. Gain insight into the factors that influence the selection of A and B V-Belts, such as the size and power requirements of the machinery or engine, and discover how to choose the right V-Belt profile for your specific application.

What Is The Difference Between An A & B V Belt? - Belthubs (1)

Belt Engineer Jack

Belt Engineer Jack is a professional with expertise in the design, development, and testing of belts for various applications. He is knowledgeable in the latest belt technology and can provide guidance and recommendations to ensure optimal belt performance and durability.

  • Belt Engineer Jack
  • May 8, 2023
  • 6:43 am

A and B V-Belts are two common profiles of V-Belts used for power transmission in various machines and engines. While they share some similarities, they differ in terms of their cross-sectional shape, dimensions, and power transmission capacity. Here’s a detailed guide on the differences between A and B V-Belts:

  1. Cross-sectional shape: A V-Belt has a trapezoidal cross-section, with a flat top and angled sides, while a B V-Belt has a wider, deeper V-shape with a rounded bottom.
  2. Dimensions: A V-Belts typically have a top width of 1/2 inch and a height of 5/16 inch, while B V-Belts have a top width of 21/32 inch and a height of 13/32 inch. B V-Belts are therefore larger and heavier than A V-Belts.
  3. Power transmission capacity: B V-Belts can transmit more power than A V-Belts due to their larger cross-sectional area, deeper V-shape, and greater thickness. B V-Belts can handle higher loads and have a longer lifespan than A V-Belts.
  4. Speed capability: A V-Belts are suitable for lower-speed applications, while B V-Belts are designed for higher-speed applications. B V-Belts have a lower tendency to whip at high speeds, reducing the risk of failure.
  5. Resistance to wear and fatigue: B V-Belts have a higher resistance to wear and fatigue than A V-Belts due to their greater thickness and larger cross-sectional area. B V-Belts are less likely to stretch or deform under load, reducing the risk of belt slippage and failure.

When selecting between A and B V-Belts, it’s essential to consider the size and power requirements of the machinery or engine. A V-Belts are suitable for lower power applications, such as lawn mowers, snow blowers, and washing machines, while B V-Belts are ideal for higher power applications, such as industrial machinery, compressors, and pumps.

The key differences between A and B V-Belts are their cross-sectional shape, dimensions, power transmission capacity, speed capability, and resistance to wear and fatigue. Careful consideration of these factors can help you select the right V-Belt profile for your specific application, ensuring optimal performance and longevity.

What Others Are Asking

Why Do Oems No Longer Use V Belts?

As a user, you may be curious about why OEMs (Original Equipment Manufacturers) are no longer using V-Belts in their machinery or engines. Discover the evolution of power transmission technology and the reasons behind the shift away from V-Belts in OEM machinery and engines. Delve into the question of why OEMs are opting for other power transmission methods, such as serpentine belts and direct drive systems. Gain insight into the specific advantages and disadvantages of V-Belts compared to other power transmission methods, and how the shift away from V-Belts is impacting the industry as a whole.

Belt Engineer JackMay 9, 2023

How to Repurpose Old Flat Belts from Machinery ?

In this problem, I am seeking guidance on repurposing old flat belts salvaged from machinery. I want to explore creative ways to give these belts a new life and utilize them for alternative purposes. Specifically, I am interested in learning techniques and ideas for repurposing old flat belts effectively and resourcefully.

Belt Engineer JackMay 31, 2023

What Are the Symptoms of a “Slipping” Cvt Transmission?

In this problem, I am seeking to understand the indications or signs that might suggest a CVT transmission is “slipping.” I want to know the specific symptoms that could arise when the transmission is experiencing this issue, potentially leading to erratic or inconsistent power delivery.

Belt Engineer JackMay 31, 2023

Where Can I Buy Flat Belts for My Vintage Wood Working Machine ?

In this problem, I am looking for information on where to purchase flat belts specifically designed for vintage woodworking machines. I want to know the best sources or locations to buy these belts, considering factors such as compatibility, quality, and availability. Specifically, I am seeking recommendations or suggestions on where to find suitable flat belts for my vintage woodworking machine.

Belt Engineer JackJune 1, 2023

How To Coil A V-Belt?

As a user, you might be interested in learning how to properly coil a V-Belt. Discover the process of coiling a V-Belt, a crucial step in storing and transporting V-Belts without damaging them. Delve into the question of the factors that influence V-Belt coiling, such as the type and size of the belt and the storage conditions, and learn how to coil a V-Belt without kinking or damaging it. Gain insight into the different types of V-Belts and their specific requirements for proper coiling, and ensure the optimal performance and longevity of your V-Belts.

Belt Engineer JackMay 9, 2023

What Can I Use To Stop V Belt Squeaking ?

As an individual experiencing V belt squeaking, what are the suitable solutions available to effectively eliminate the annoying noise and prevent further discomfort?

Belt Engineer JackMay 12, 2023

How many miles to change timing belt ?

How many miles to change timing belt ? As a vehicle owner, I am unsure about the recommended mileage interval for timing belt replacement. Can you provide guidance on how many miles I should typically drive before considering a timing belt replacement? I am seeking information to ensure the timely maintenance of my vehicle’s timing belt and prevent any potential damage or failures.

Belt Engineer JackMay 13, 2023

Read Advice From Belt Experts

Belt Conversion Guide

What Is The Difference Between An A & B V Belt? - Belthubs (3)

AX Belt Conversion Chart: A Comprehensive Tool for Accurate Belt Replacement

Belts play an essential role in machinery and vehicles, providing power transmission between different parts of the equipment. As belts are used, they can become

May 6, 2023No Comments

Belt Conversion Guide

What Is The Difference Between An A & B V Belt? - Belthubs (5)

Upgrading Your Drive System: Understanding 3L Belt Conversion Chart

Proper belt selection is a crucial factor for optimal machinery performance and safety in various industrial applications. Selecting the right belt type and size ensures

May 5, 2023No Comments

Belt Conversion Guide

What Is The Difference Between An A & B V Belt? - Belthubs (7)

5VX710 Belt Conversion: Upgrading Your Machinery

In today’s fast-paced world, businesses are always looking for ways to improve their efficiency and productivity. One area that often gets overlooked is machinery upgrades.

May 5, 2023No Comments

Belt Conversion Guide

What Is The Difference Between An A & B V Belt? - Belthubs (9)

Simplifying Belt Replacement with Gates Belt Cross Reference Chart

Belts play a critical role in the proper functioning of various machines and vehicles. They are used in numerous applications, including power transmission, automotive systems,

May 6, 2023No Comments

Belt Conversion Guide

What Is The Difference Between An A & B V Belt? - Belthubs (11)

Replacing Belts Made Easy: Gates Belt Cross Reference Chart for Industrial Applications

Proper belt selection is a critical factor in industrial applications to ensure optimal machinery performance and safety. The right belt can improve efficiency, reduce downtime,

May 5, 2023No Comments

Buy Cost-Effective Belts

What Is The Difference Between An A & B V Belt? - Belthubs (13)

Mitsuboshi D100 V-belt(2540 mm)

Belt Engineer JackNo Comments

What Is The Difference Between An A & B V Belt? - Belthubs (15)

Optibelt XPZ 687 V-belts(687mm)

Belt Engineer JackNo Comments

What Is The Difference Between An A & B V Belt? - Belthubs (17)

Gates 8V1600 Super HC Belts |9336-1600(160 in)

Belt Engineer JackNo Comments

What Is The Difference Between An A & B V Belt? - Belthubs (19)

MITSUBOSHI 150-S8M-496 Timing Belt(496mm)

Belt Engineer JackNo Comments

What Is The Difference Between An A & B V Belt? - Belthubs (21)

Mitsuboshi D135 V-belt(3429 mm)

Belt Engineer JackNo Comments

What Is The Difference Between An A & B V Belt? - Belthubs (23)

Goodyear B24 (5L270) V-belt(27.0 in)

Belt Engineer JackNo Comments

What Is The Difference Between An A & B V Belt? - Belthubs (2024)

FAQs

What is the difference between belt and V-belt? ›

The power transmitting capacity of the Flat Belt Drive is low due to slip. The slip is very low, and friction is more in V-belt. Hence, the power transmitting capacity is more. The Flat belt drive is suitable when the velocity ratio is up to 4:1 The V-belt drive is suitable for a higher velocity ratio (up to 7:1).

What is the difference between a timing belt and a V-belt? ›

Timing belts are designed with teeth and require the installation of a matched tooth-driven sprocket. They are commonly used in industrial applications because they operate at up to 98% efficiency. While V-belts also offer high efficiency, their effectiveness is drastically reduced in a short period due to slippage.

What's the difference between a V-belt and a serpentine belt? ›

A serpentine is a wider, thicker, updated version of its predecessor, the V-belt. You're more likely to find a V-belt in an older model, while newer cars have serpentine belts. Both belts serve the same purpose in your engine: delivering power to your steering, air conditioning, alternator, and other systems.

What is the difference between a pulley and a V-belt? ›

V-belt pulleys require more careful alignment than pulleys due to their design, as misalignment can cause belt slippage and reduce power transmission efficiency. V-belt pulleys are generally more expensive than pulleys due to their more complex design and manufacturing process.

What is the V-belt for? ›

What is a V-belt used for? V-belts are used to transmit mechanical power efficiently between different parts of a machine. They are commonly used on automobile engines to drive accessories, such as the air conditioning compressor, power steering pump, alternator, and fan.

What are the advantages of V-belt over flat belt? ›

Advantages of V -belt drive:
  • It is compact, so installation is possible in limited space.
  • It is used when the centre distance between the drive and the driven pulleys is short.
  • Less vibration and noise.
  • Cushions the motor and bearing against load fluctuation.
  • Higher velocity ratio (Upto 10) can be obtained.
May 29, 2023

What is the disadvantage of V-belt drive? ›

The V-belt drive cannot be used with large centre distances, because of the larger weight per unit length. The V-belts are not as durable as flat belts. The construction of pulleys for V-belts is more complicated than pulleys for flat belts.

What is better a timing belt or timing chain? ›

A quieter engine is often more appealing to buyers, so the timing belt is installed to ensure a smoother sound. The longer lifespan of a timing chain is why they are chosen over timing belts – they very rarely break, but any problems that do arise are easy to catch before they reach the point of no return.

Can you tell if a timing belt is worn? ›

If you hear a ticking noise under the hood, there's a good chance that your timing belt needs to be replaced. The belt is attached to your engine's crankshaft with a series of pulleys. When the belt is worn out, it will not be able to turn the crankshaft as effectively. This is what causes the ticking noise.

Why are V belts better? ›

V-belts produce less noise compared to flat belts. The V-groove pulleys guide the belts smoothly, reducing vibrations and noise levels. This characteristic is valuable in applications where noise reduction is essential for a more comfortable and safer working environment.

What is the difference between V-belt and W belt? ›

Wedge belts are very similar to V-Belts, but feature a narrower, wedge shape to the profile. That narrower profile means they're often used when space is limited, but power is important – they can transmit more power than a V-Belt of the same top width.

What is the difference between V-belt and B belt? ›

V and VX belts are specifically designed for higher horsepower and longer center distance applications. For example, most applications up to 7.5 HP where a single belt is being utilized, an A or B belt is more than adequate to do the job. The V and VX belts, on the other hand, may be better for 10HP and larger.

Which is better V pulley or timing pulley? ›

Types of pulley belts

V belt is used for shafts that are at a distance of fewer than 2 meters. It has limited speed and high power. Circular Belt is used for distances more than 5 meters and transmits high power. Timing belts are used for internal Combustion of engines and transmit powers.

What are the three 3 types of pulley? ›

Among the pulley simple machines, there are three different types of pulleys:
  • Fixed pulleys are a very common pulley. These pulleys are secured to a single spot. ...
  • Movable Pulleys are yet another type of pulley. ...
  • Compound Pulley Systems are a combination of both movable and fixed pulleys.

What are the three types of V belts? ›

There are three types of V-Belts available through a V-Belt manufacturer: the classical, fractional horsepower and narrow wedge.

What are the three types of belts? ›

There are three basic types of power transmission belting: flat, V, and synchronous.

Which is better V belts or cog belts? ›

Cogged belts have slots that run perpendicular to the belt's length. The slots reduce the belt's bending resistance. Cogged belts can be used with the same pulleys as equivalently rated V- belts. They run cooler, last longer, and have an efficiency that is about 2% higher than that of standard V-belts.

How do you identify V belts? ›

V-belt cross sections can be identified by their top width and depth dimensions. For example, a v-belt with a top width of 21/32” and a depth of 7/16” is a “B” belt. You can also use our Browning Belt Rule that includes a gauge to help easily identify belt type.

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Cheryll Lueilwitz

Last Updated:

Views: 6153

Rating: 4.3 / 5 (54 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Cheryll Lueilwitz

Birthday: 1997-12-23

Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

Phone: +494124489301

Job: Marketing Representative

Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.