If you have come across the “Recovery is not Seandroid Enforcing” error on your Samsung device, then don’t worry, there are a couple of ways using which you can get rid of this error and get your deviceworking again.“Recovery is not Seandroid Enforcing” mainly occurs when you are trying to root your Samsung device with a wrong file which is not compatible with your current firmware.
For instance, ifyour Samsung device has been updated tothe latest Android 5.1.1 Lollipop firmware, and you try to root your device with the CF-Auto-Root that is compatible with Android 5.0 firmware. This is a very common occurring error for the Galaxy S7 users who have updated to Android 5.1.1 firmware for which the root method is not yet working.
Recovery is not Seandroid Enforcing is similar to a bootloop except for here, the device is stuck at the Samsung logo and does not even display the boot animation. And on the top left corner, a “Recovery is not Seandroid Enforcing” error is displayed after which the device does not boot up.
If you are facing this dreadful error, then here is a guide which will help you boot your phone normally. Thissolution works on all Samsung Galaxy devices including Samsung Galaxy S9, Galaxy S8, Galaxy S7, Note 9, Note 8 and more.
There are two methods using which you can remove this error. You can either wipe the data and factory reset your phoneor if this doesn’t work, then you need to flash the firmware using the Odin Software designed, especially for Samsung devices. A simple factory reset works for most devices.
Fixing Recovery is not Seandroid Enforcing
Perform Factory Resetby Wiping Data
Perform a full Factory Reset of your device which could help solve this problem. This will remove all the data on your Galaxy device and reset the phone’s stock firmware. To do this, you need to reboot the phone into recovery mode. To reboot to recovery mode, first Power off the phone and then press thePower button, Volume UPbutton, and Home button at the same time. Once you boot into the recovery, choose the“Wipe Data/Factory Reset” option. Navigate using the Volume buttons and select using the Power button. Now reboot the device to thesystem. If this method doesn’t work for you, then you need to flash the stock firmware for your Galaxy device.
You can find detailed steps here:
- How to Perform Data Factory Reset and Wipe Cache on Samsung Devices
Sometimes mere factory reset won’t work as changes may have been made to the core system of your firmware. You would need to flash the full stock firmware available for your Samsung device using Odin Software. If you are new to the process or have not used theOdin Software before, then get to our guides that will help you install the stock firmware. You can lookfor the tutorials on DroidViews or get to the below link.
How to Install Stock Firmware on Samsung Galaxy Devices Using Odin
Related Posts
Download Odin Tool for Samsung Devices (All Versions)
Restore Samsung Devices to Stock Firmware Using Odin – Detailed Guide
How to Perform Factory Reset and Wipe Cache on Samsung Devices
Reader Interactions
Discussion
-
says:
Reply
i get this error when i try to reach “recovery” menu
-
Rakesh says:
Reply
Which error?
-
-
Jay McGregor says:
Reply
I get same error but phone works perfectly….. how do i just get rid of the error message??
-
Volume up + home + power just turns on my phone, taking me back to the error screen. Volume DOWN + home + power does however still take me to the download screen, fortunately.
-
Amanda Throckmorton says:
Reply
All my friends google philz_touch_6.26.2-klte.tar.md5 this should be able to get you a recovery file of md5 to be able to not root but fix your phone so you can use it. I tried rooting It’s a very hard thing to do as carriers are always updating the device.
-
95akorio98 says:
Reply
I’ve completely given up on rooting.
-
mikaro says:
Reply
Yes, my phone is fixed. Using usb JIG to get in to download mode after that I using Odin3 to finish it:)
-
mikaro says:
Reply
I am trying to install recovery but when I push power+volumeup+home its says RECOVERY IS NOT SEANDROID ENFORCING. please Help Me .
-
Uli Herrmann says:
Reply
had the same problem. I re-flashed latest twrp-recovery (for my Tab-S T805) (using odin after boot to download-mode)
no data lost! But still no root for 6.0.1-
Vanderlan Chaves says:
Reply
I too.
download firmware (model of your smartphone) in http://www.sammobile.com and put in with odin.
-
-
-
Juanitaandbobby Aldridge says:
Reply
okay so I have been trying to fix my phone and I’m not sure how. Every time I go to turn it on it says Kernel is not seandroid enforcing and under that says Set warranty Bit: kernel
How I fix this problem -
Truth Finder says:
Reply
Wrong! As usual. I have been attempting to root Samsung Galaxy Note 4, SM-N910T3, Android Version 6.0.1 using appropriate CF-Root file. First I received the FAP error because it was not in the instructions that I need to go into developer options and check the box “OEM UNLOCK”. Then I tried rooting again and am still getting SEANDROID ENFORCING BS! See, nobody really has the answer, they all like to pretend they do.
-
Archy12 says:
Reply
Hi all,
My Samsung Note 3 lollipop 5.0 (rooted with Kingoroot) was stuck in samsung logo after I flashed xposed framework through TWRP in flashify. So I tried to flash TWRP using odin, got the “pass”. But when I tried the button combos to boot into recovery mode, I keep getting the “recovery is not seandroid enforcing” and the phone power off and on again.
So now, I can’t get my phone turned on pass the samsung logo, and I can’t get into recovery mode. What can I do? Please help!
-
FlankerE says:
Reply
i cant going Wipe Data/Factory Reset mode,always show Recovery is not Seandroid Enforcing
-
FlankerE says:
Reply
pls help me
-
S_L says:
Reply
You will want to flash with ODIN. And/or putting your device into download mode. At the conformation of a custom OS press volume down key to restart.
-
-
-
Dude Game says:
Reply
if it is a custom recovery like TWRP 3.0.0 just wait sometime it should boot up to TWRP 3.0.0
-
Hydro says:
Reply
If you get the “recovery is not seandroid enforcing”, something is wrong w/ your recovery partition and booting into recovery is impossible as you will only receive this message, so your first suggestion would not work…I think flashing via Odin is about the only way to fix the problem. I recently had this problem w/ my new Galaxy Grand Prime LTE running 5.0.2. I accidentally flashed a CWM for 4.4 and got the dreaded message. I got the phone to reboot normally and it runs fine now, but unfortunately the firmware for my variant hasn’t been released so i’m unable to flash back the stock recovery. I’m afraid to do a factory reset because i am under the impression that “recovery” is where the “Factory reset” info is contained much like the recovery partition on a PC, and i fear it will brick my phone. Am I wrong? Can a simple reset fix this?
-
Sarang says:
Reply
If you have a custom recovery as you have mentioned about the CWM and if you perform a factory reset, then I am afraid it won’t work. You can install the stock firmware to get back your device. I am pretty sure you will find a firmware file for Grand Grand Prime as I have covered some variants for the same.
-
Hydro says:
Reply
I have scoured the Internet looking to no avail. This model (S-SM920L) is still very new.
-
Mark Burkey says:
Reply
i had same prob with my j5 so i just loaded up kies on pc connected phone and go to the tool tab on kies scroll down to initiate firmware and put in model and serial number make sure phones in download mode obvs and bingo i was back to normal.there musnt be the correct root file out yet or you have the wrong cf root file hope this helped
-
-
-
Join The Discussion:
This site uses Akismet to reduce spam. Learn how your comment data is processed.
